Custom LiFePO4 Batteries for Solar CCTV Systems
Custom 12V and 24V battery backup for CCTV, security camera, and off-grid surveillance systems — with low-temperature charging, BMS protection, and solar-controller compatibility.
Send us your system voltage, load power, solar input, operating temperature, and required runtime.
Reliable Battery Backup for Outdoor CCTV and Security Camera Systems
Solar CCTV and remote surveillance systems often operate in locations where grid power is unstable or unavailable. Battery performance directly affects camera uptime, data transmission, emergency backup, and overall system reliability.
Wiltson Energy develops custom LiFePO4 battery packs and backup power for CCTV, security camera, and off-grid surveillance systems. Each battery can be configured around your system voltage, daily energy consumption, solar input, backup duration, operating temperature, and installation space.
Insufficient runtime during cloudy weather
Battery charging failure in cold environments
Frequent battery replacement
Unstable power for cameras and communication modules
Poor compatibility with solar charge controllers
Inadequate BMS protection
Limited installation space
Harsh outdoor operating conditions
Custom Battery Solutions Built Around Your CCTV System
12V and 24V Battery Packs
Custom 12V and 24V battery backup for camera and CCTV systems — sized for cameras, routers, controllers, wireless transmitters, and other surveillance-system loads.
Solar Charging Compatibility
Battery packs can be matched to solar charge controllers and configured for solar-powered CCTV and off-grid monitoring systems.
Low-Temperature Charging
Designed for outdoor systems operating in cold climates where standard LiFePO4 batteries may not charge reliably.
Integrated BMS Protection
Protection options can include overcharge, over-discharge, overcurrent, short circuit, temperature protection, and cell balancing.
Custom Runtime and Capacity
Battery capacity can be selected according to load power, working hours, backup duration, local sunlight conditions, and required autonomy days.
Custom Mechanical Design
Customize the enclosure, dimensions, connectors, cable length, mounting method, waterproof requirements, and communication interface.
Verified low-temperature performance
Discharge Capacityat -40°C (-40°F)
A heated pack cannot deliver power at -40°C until its cells warm up — and at an off-grid camera site, that heat has to come from the same limited solar-and-battery reserve.
Charging Timeat -30°C (-22°F)
Heated packs need roughly 5 hrs of warm-up plus 2 hrs of charging, using up most of the limited winter charging window; Wiltson packs start charging immediately, with no warm-up cycle.
Discharge Rateat -40°C (-40°F)
A cold-weather discharge rate up to 15× higher supports camera and IR-illuminator startup loads on the coldest nights.
Typical Customization Options
| Parameter | Available Options |
|---|---|
| Nominal Voltage | 12V, 24V, custom |
| Battery Chemistry | LiFePO4 |
| Capacity | Customized by load and runtime |
| Charging Source | Solar controller, DC charger, hybrid input |
| BMS | Standard or customized |
| Operating Temperature | Configured for project conditions |
| Low-Temperature Charging | Available |
| Enclosure | Plastic, metal, custom housing |
| Protection Level | Project-dependent |
| Connectors | Customized |
| Communication | Optional CAN, RS485, UART, Bluetooth |
| Branding | OEM labels and packaging |
| Certifications | Based on project and market requirements |
Battery Applications for Solar and Remote Surveillance
Solar-Powered CCTV
Battery storage for cameras, routers, controllers, and wireless communication equipment in solar CCTV installations.
CCTV & Security Camera Backup Power
LiFePO4 battery backup for CCTV and security camera systems, keeping surveillance online during grid outages or unstable power.
Off-Grid Surveillance
Outdoor camera system battery backup for remote sites with no reliable grid connection.
Cold-Climate Security Systems
Low-temperature CCTV backup battery solutions for outdoor cameras operating in winter and sub-zero environments.
Remote Monitoring Stations
Power support for cameras, sensors, gateways, communication modules, and monitoring controllers.
Industrial and Infrastructure Monitoring
Suitable for highways, railways, construction sites, oil and gas facilities, telecom infrastructure, farms, and remote assets.
Solar CCTV power chain
Solar Panel
Daytime charge source
Charge Controller
Regulates input
LiFePO4 Battery
Wiltson custom pack
Camera & Router
CCTV + link loads
Solar Panel
Daytime charge source
Charge Controller
Regulates input
LiFePO4 Battery
Wiltson custom pack
Camera & Router
CCTV + link loads
The battery sits between solar charging and the surveillance loads — sized for voltage, runtime, cold-weather charge behavior, and enclosure constraints.
Why Choose Wiltson for Your CCTV Battery Project?
Wiltson Energy focuses on custom lithium battery solutions for demanding outdoor and low-temperature applications. We work with equipment manufacturers, system integrators, and project contractors to match battery performance to real operating conditions.
- Experience in low-temperature battery development
- Custom 12V and 24V LiFePO4 packs
- Battery and BMS matching
- Solar-controller compatibility support
- OEM/ODM engineering support
- Custom connectors and enclosures
- Sample and prototype development
- Production support for volume orders
From Requirements to Custom Battery Pack
Step 1: Share the System Requirements
- Camera quantity
- Total load power
- System voltage
- Required backup hours
- Solar panel output
- Solar controller model
- Minimum and maximum temperature
- Installation-space limits
- Target market and certification requirements
Step 2: Battery Configuration
Wiltson recommends the battery voltage, capacity, BMS, charging parameters, enclosure, and connector configuration.
Step 3: Sample and Testing
A sample can be produced for electrical, charging, runtime, temperature, and system-compatibility testing.
Step 4: Production
After sample approval, proceed with OEM/ODM production and quality control.
Certifications
CE
CB
UN38.3
UL1642
REACH
RoHS
Frequently Asked Questions
What battery is suitable for a solar CCTV system?
The correct battery depends on system voltage, camera and communication load, required runtime, solar charging conditions, ambient temperature, and installation space. Wiltson can configure 12V or 24V LiFePO4 battery packs based on these requirements.
Do you provide battery backup for security camera and CCTV systems?
Yes. Wiltson builds custom battery backup for CCTV and security camera systems — 12V or 24V LiFePO4 packs sized to your camera load, required runtime, and operating temperature, for both grid-connected and off-grid installations.
Can you provide an outdoor security camera with battery backup?
Wiltson supplies the custom outdoor battery backup for security camera systems rather than the camera itself. The LiFePO4 pack can be sized for cameras, PoE equipment, routers, recorders, solar charging, required runtime, enclosure limits, and cold-weather operation.
Can the battery work with a solar charge controller?
Yes. The battery charging voltage, current, protection settings, and communication requirements can be matched to the solar controller used in the CCTV system.
Can you provide a battery for cold-weather CCTV systems?
Yes. Wiltson can develop low-temperature battery solutions for outdoor surveillance systems operating in cold climates. The exact charging and discharging temperature range should be confirmed for each project.
Can you customize the battery capacity?
Yes. Capacity can be selected according to the total system load, expected backup time, available solar energy, and required autonomy during cloudy conditions.
Do you provide complete CCTV systems?
Wiltson supplies custom battery packs and battery solutions. CCTV cameras, solar panels, and complete surveillance systems are not the primary products unless specifically confirmed for a project.
Can you customize connectors and enclosures?
Yes. Connectors, cables, housing dimensions, mounting design, labels, and packaging can be customized according to project requirements.
Can you provide OEM and ODM services?
Yes. Wiltson supports custom battery development, sample production, branding, packaging, and volume manufacturing.
Get a Battery Recommendation for Your CCTV System
Include your system voltage, total load power, required runtime, solar controller model, operating temperature range, and target quantity, and we will recommend a configuration.
Get Datasheet + Certification Pack + Sample Proposal
Submit your requirements and our engineering team will respond within 24 hours.